Painting On Glass Windows-manufacture,factory,supplier from China

Causes of mold on glass & How to deal withGlass mold is an industrial problem in the glass industry. Every spring and summer, due to the high temperature and high humidity weather, the glass rainbow/stain enters a peak period.

Insulating glass (IG) is separated by two or more glass panes through a vacuum or gas filled space to reduce part of the enclosure through which heat transfer passes. Insulating glass for windows A is commonly referred to as double glazing or double pane windows, triple glazing or triple pane windows, or quadruple or quadruple pane windows, depending on how many panes are used for their construction.The insulating glass unit (IGU) is usually made of glass with a thickness of 3 to 10 mm. Thicker glass is used for special applications.

1. Doors and windows: Tempered glass doors and windows are more secure. After all, they cannot be easily damaged. As doors and windows, their safety performance is much higher than that of ordinary glass doors and windows.2. Installation of shower room.3. Glass partition: When pretending, glass partition is also very popular. Tempered glass partition is much more stable than ordinary glass in performance.4. Ceiling design: The design of tempered glass as a ceiling is not only highly practical, but also looks more beautiful, which is also the preferred material for many people.5.

The answer is yes, tempered glass is required for buildings over seven stories. When tempered laminated glass is subjected to external forces, it is restricted to resist surface stresses, thus increasing the resistance of the laminated glass itself to air pressure. When this glass encounters external forces, instantly smashed, the fragments will not cause harm to humans, is a relatively high safety factor.About the daily cleaning of tempered glass, just wipe it with a wet cloth, you can also buy a brush to clean the glass, so that the dust on the glass can be wiped clean.

EVA safe glassAlso known as: laminated safety glass evasafe, laminated E.V.A. (ethylene cinyl acetat), laminated evasafe, laminated stadip protect evasafe, laminated stratobel eva creation.Laminated glass with EVA foilRecently, the laminated glass with EVA film used. EVA stands for Etyleen Vinyl Acetate. This film is less sensitive to moisture and is therefore more suitable for outdoor applications of laminated glass.Depending on the required protection, a package can be composed which consists of several thicknesses glass and foil.

     Tempered glass is a kind of ordinary flat glass formed after heat treatment. It forms a compressive stress layer on the surface of the glass, with increased mechanical strength and heat-resistant impact strength, and a special crumb state.

In life, flat curved tempered glass we can often use, together with good characteristics, loved by people, in daily use, flat curved tempered glass to pay attention to maintenance, not only to extend its service life, but also to reduce damage, then flat curved tempered glass how to maintain it? Next take a look at it together!To often clean the tempered glass, in the daily cleaning, wipe with a wet towel or newspaper can be, wet towel can wipe most of the stains, newspaper can wipe the water stains on the glass surface.

Even if the glass is broken, the fragments will be stuck to the film, and the broken glass surface will remain clean and smooth. This effectively prevented the occurrence of debris stabbing and penetrating accidents, and ensured personal safety. In Europe and the United States, laminated glass is used for most building glass, which is not only to avoid injury accidents, but also because laminated glass has excellent anti-seismic intrusion capability.

                                                 Spontaneous Glass Breakage ReportSpontaneous glass breakageSpontaneous glass breakage is a phenomenon by which toughened glass (or tempered) may spontaneously break without any apparent reason.

Thickness of the glass: The heat transfer coefficient of insulating glass is directly related to the product of the thermal resistance of the glass (the thermal resistance of the glass is 1mK/W) and the thickness of the glass. When increasing the thickness of the glass, it will inevitably increase the blocking ability of the piece of glass to heat transfer, thereby reducing the heat transfer coefficient of the entire insulating glass system.